Permit Requirements for Broadview, Montana
For Plumbing projects in Broadview, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Yellowstone County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for Plumbing work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
General Plumbing Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for Plumbing in this area, please submit an update.
Because Broadview is located within Yellowstone County, the following broader county regulations may also apply to your project:
Montana, Yellowstone County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Yellowstone County, Montana Plumbing Permit Requirements
In Yellowstone County, Montana, plumbing permit requirements are primarily governed by the state's building codes, with specific local regulations that may apply, especially for unincorporated areas. Montana has adopted the 2021 Uniform Plumbing Code (UPC) as its foundational technical reference for plumbing, which includes state-specific amendments to address local conditions. For properties in unincorporated areas of Yellowstone County, plumbing permits are generally handled by the State of Montana Building Codes Division. However, it is always advisable to contact the Yellowstone County Public Works Department or City/County Planning to confirm specific requirements for your location.
Jurisdiction and Permitting
The City of Billings does not issue permits for construction outside of its city limits. Therefore, for properties in unincorporated Yellowstone County, permits are typically obtained from the State of Montana Building Codes Division. The state requires a plumbing permit for new water supply installations and for alterations that extend, reroute, or replace supply lines. Licensed installation by a Montana-licensed journeyman or master plumber is mandatory.
Rules for Properties in Unincorporated Areas
For properties located outside of incorporated cities and towns within Yellowstone County, the State of Montana Building Codes Division is the Authority Having Jurisdiction (AHJ) for many building, plumbing, mechanical, and electrical permits. This means that if you are undertaking plumbing work in an unincorporated area, you will likely need to obtain your permit from the state. It is important to note that even if a building project is exempt from a general building permit, it may still require separate electrical, plumbing, or mechanical permits from the state.
State Plumbing Code and Amendments
Montana's plumbing standards are based on the 2021 Uniform Plumbing Code (UPC), as amended by the Administrative Rules of Montana (ARM). These amendments can address specific issues such as minimum pipe burial depths for freeze protection and approved materials for rural settings. The state requires that all plumbing work comply with these codes.
Exemptions
While a plumbing permit is generally required, there are some exemptions. Homeowners performing their own plumbing installations for their personal use (not for speculation or rental) may be exempt from obtaining a permit. Additionally, farms, ranches, mines, mills, smelters, railroads, and public utilities are exempt from state plumbing permit requirements.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Montana:
Montana Plumbing Legislation, Codes, and Guidelines
State-Level Plumbing Codes in Montana
The State of Montana adopts and enforces the Uniform Plumbing Code (UPC), 2021 Edition. This code is incorporated by reference into the Administrative Rules of Montana (ARM), specifically under Title 24, Chapter 301, Subchapter 3. The state also adopts various appendices to the UPC to address specific requirements, such as water supply sizing, alternate plumbing systems, and sustainable practices.
Regulatory Agencies and Boards
Plumbing regulation in Montana is primarily managed by the Montana Department of Labor & Industry (DLI) through the following entities:
- Building Codes Program: Located within the DLI's Business Standards Division, this program is responsible for the statewide adoption and enforcement of building codes, including plumbing. It handles permitting and inspections for areas of the state that do not have their own certified local enforcement programs.
- Montana Board of Plumbers: This board is responsible for the licensing and regulation of plumbing professionals in the state, including apprentice, journeyman, and master plumbers. It operates under the DLI to ensure that individuals performing plumbing work meet the necessary qualifications and standards.
Resources to Learn More